Ametek Mocon Dansensor LeakPointer 3, User Manual

Page: 29 / 100

Dansensor
®
LeakPointer 3/3 + EN User Guide 27
P/N 380064-F
06/2021
Typing
An onscreen keyboard appears automatically anytime you need to type. An alphanumeric
keyboard appears when you must enter text, such as product- or user names while a numeric
keyboard appears when typing numerical values only, such as PIN-codes.
In the alphanumeric keyboard you can switch between upper- and lowercase characters,
special characters, numbers or symbols, by tapping the appropriate keyboard selection key to
the left of the
key.
The key deletes all the text whereas the key deletes the character to left of the cursor.
The and keys move the cursor one character to the left or right respectively, and the
and keys make the cursor jump to the beginning or end of the text respectively.
Tapping the key confirms the input and closes the keyboard, while tapping the key will
discard the entered text and exit the keyboard.
Entering accented letters or other alternate characters is done by touching and holding the
related key...
...and then selecting the appropriate character from the pop-up list.

Pressing the icon will close the pop-up list without typing any character.