A
NNUNCIATOR
M
ODEL
C
ODE
D
EFINITION
AN-3100D Model Number
AN-3100D- - - - - - -
______ ______ _____ _____ _____ _____ _____
Item 1
Item 2
Item 3
Item 4
Item 5
Item 6
Item 7
Mounting
# of Cells
# of Cells Common Window Active
Window
Options
High
Wide
Service
Size
Points
Color
- - - - - - -
_____
_____
_____
_____ _____ _____ _____
Item 8
Item 9
Item 10
Item 11
Item 12
Item 13
Item 14
Operational
Repeat
Power
Field
Contact
Window
Comm.
Options
Sequence
Relay
Input
Voltage Legends Options
Example: AN-3100D-PM-3H-6W-INTB-2-34-W-A-RR-B-X-TP-MB-TS-IB-RLY
Item 1 Mounting Options
PM
Semi-Flush Panel Mounting
PC
Semi-Flush Panel Mounting w/rear cover
RK
19” Rack Mounting (5 wide systems only)
S
Surface (Wall) Mounting (1H to 5H x 2W to 5W)
NCB Weather-tight NEMA Front Cover w/ ¼-20 Bolts
NCT Weather-tight NEMA Front Cover w/T Handle
N4
NEMA-4 Enclosure (1H to 6H x 3W to 8W)
N4PB
NEMA-4 Enclosure w/PB (1H to 6H x 3W to 8W)
Item 2,3 Annunciator Size
# of Cells High
(1-13)
# of Cells Wide
(2-13)
Item 4 Common Service Cell
(lower right cell)
INTB
Integral Pushbuttons (ACK, SIL, TEST, RESET)
NPB
Pushbuttons replaced w/ a Half or Full Size Window
Note:
For either selection above, external pushbuttons
can be connected to the Annunciator terminal blocks.
Item 5 Window Size
4
Quad Size, 4 inputs per cell, ea 1.5”H x 1.5”W
3
Third Size, 3 inputs per cell, ea 1.0”H x 3.0”W
2E
Half Size, 2 inputs per cell, ea 1.5”H x 3.0”W
2S
Half Size, 2 inputs per cell, ea 1.5”H x 3.0”W
2
Half Size, 2 inputs per cell, ea 1.5”H x 3.0”W
1E
Full Size, 1 input per cell, ea 3.0”Hx3.0”W
IMW
Intermixed window size
Note:
Option
1E
indicates that the cell is expandable up to 2 inputs.
Option
2E
indicates that the cell is expandable up to 4 inputs.
Option
2S
indicates one input module per single input provided.
Do not include the CSM Cell in your quantity.
Item 6 Active Points
Total # of active points
Item 7 Window Color
W
White Window Filter
R
Red Window Filter
A
Amber Window Filter
G
Green Window Filter
Y
Yellow Window Filter
B
Blue Window Filter
IMC
Intermix color, matrix must be included
Item 8 Operational Sequence
A; A4; A4-5-6; M; R; R-12 ; F1A; F2A; F3A; F2M-1;
FFAM2; F3C ; R12C ; RC
IMO
Intermixed Sequences (up to 4 available)
Item 9 Repeat Relay Option
RR
Auxiliary Repeat Relay Provided for every Input.
(Can be field configured to follow: alarm input status,
alarm sequence operation or Lamp Flash. Relays
can be set for normally energized or de-energized
operation and are jumper selectable for a Form A or
Form B contact arrangement).
FRC
Auxiliary Repeat Relay Provided for every Input with
Form C (SPDT) Contacts.
(Can only be used with Window Size 1E or 2S).
2RR
Two Repeat Relays for every input.
(Selectable for a Form A or Form B contact
arrangement. Can only be used with Window
Size 1E or 2S.)
NR
No Repeat Relays required
(Note: Can only choose one selection from above).
Item 10 Power Input
F 24
VDC
E 48
VDC
C 125
VDC
B
120 VAC, 60 HZ
A
230 VAC, 50 HZ
Item 11 Field Contact Voltage (FCV)
Field Contact Voltage internally supplied by AMETEK, with
common system-wide FCV return.
*
For System Input Power Voltages of 120/230VAC or 125VDC.
D
125 VDC FCV
X
24 VDC FCV
Field Contact Voltage externally supplied by Customer, internally
bussed to all input modules.
DC
125 VDC FCV supplied by Customer
TC
48 VDC FCV supplied by Customer
XC
24 VDC FCV supplied by Customer
JC
12 VDC FCV supplied by Customer
Field Contact Voltage externally supplied by Customer.
Every input is isolated and requires a separate FCV connection.
D/ISO
125 VDC FCV supplied by Customer
T/ISO
48 VDC FCV supplied by Customer
X/ISO
24 VDC FCV supplied by Customer
J/ISO
12 VDC FCV supplied by Customer
Y/ISO
120 VAC FCV supplied by Customer
NR
No Field Contact Voltage (Serial Input Only)
4
AN-3100D ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL