Ametek Land LMG MkII, User Manual

Page: 32 / 96

User Guide 3 - 10
Signal Processor LMG MkII
3.9 Output
1) To access the Configuration Menu, press the Settings button
2) Select the Output option. A typical Output display is shown in Fig. 3-11.
Fig. 3-11 Output display
Each channel I/O card has a fixed mV/° voltage output, and a configurable
current output.
The voltage output is useful for connecting a DVM or voltage panel meter
to get a direct temperature reading of the display e.g. if the temperature
reading on the LMG MkII display is 1135 °C, the mV/° output will be 1.135 V.
Each channel I/O card also has a configurable current output – the output
can be selected to be either 0-20 mA or 4-20 mA. The maximum and
minimum temperature of the selected current output range can set within the
range of the temperatures of the attached thermometer (subject to minimum
span of 100°).
3.10 Label
1) To access the Configuration Menu, press the Settings button
2) Select the Label option.
A typical Label display is shown in Fig. 3-12.
Fig. 3-12 Label display