HD
TV
Designed For
VHF/UHF
TV Antenna
Digital and HDTV Compatible
Improved Reception for Channels 2 to 69
Receives local HD and Digital TV broadcast signals for free
Adjustable VHF dipoles extend to improve reception
UHF loop for improved reception of channels 14-69
Non-scuff base protects cabinets and TVs
Includes 58" coax cable
VN1ANTP2
Reception Frequency
VHF (47~230MHz) / UHF (470~860MHz)
Impedance
75 Ohms
Zenith is a registered trademark of Zenith Electronics LLC and used under license.
Zenith est une marque de commerce déposée de Zenith Electronics LLC et utilisée sous licence.
Zenith es una marca registrada de Zenith Electronics LLC y se utiliza bajo licencia.
Connect to TV
-Connect coaxial cable connector to TV's RF input
Adjust Antenna
-Rotate antenna base to improve UHF signal
-Extend and move dipoles to improve VHF reception
Note:
If antenna is not receiving correctly, try placing in different position.
Installation
1
2
250 Boulder Dr.
Breinigsville, PA 18031
610-336-1330
www.amertac.com
Made in China /
Fabriqué en Chine /
Fabricado en China
© 2018 AmerTac™
I18-0109-A
