Ameriwood HOME 8368222COM Manual Download Page 1

Wall Bed

8368222COM (Columbia Walnut)
8368340COM (Andover Oak)
8368341COM (Magnolia Oak)

and Gardens

omes

Better

H

COSCO

A Dorel Company

MERIWOOD

INDUSTRIES

TM

- Unit can tip over causing severe injury or death.
- Anchor unit to studs in wall (if instructed to).
- Do Not allow children to climb on unit.

B348368000COM0

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

WARNING

Follow Ameriwood Home

Tube

You

Date of Purchase ___ / ___ / ___
Lot Number:

Do Not Return This Product! 

Contact our customer service team for help first.

Call: 1-800-489-3351 (toll free) 

Monday-Friday 9am - 5pm CST

Visit: www.ameriwoodhome.com

Assembly Difficulty Meter

Easy

Tough

Assembly Difficulty Meter

Easy

Tough

WARNING:
* WARNING FOR YOUNG CHILDREN - This product contains small components, please ensure 
that they are kept away from small children. Children under the age of 6, small infants and babies
must not sleep on this bed for safety reasons. To prevent injury and damage to this unit,
PROHIBIT jumping on it.
* This product is designed for home use and not intended for commercial use.
* Recommended # of people needed for assembly 2 (however it is always better to have an extra 
hand.) Estimate assembly time is 1.5 hour.
* THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE 
READ AND KEEP FOR FUTURE REFERENCE.

ADVERTENCIA:
* ADVERTENCIA para los ni os peque os - Este producto contiene piezas peque as, por favor 
aseg rese de que se mantengan alejados de los ni os peque os. Los ni os menores de 6 a os,
los ni os peque os y los beb s no deben dormir en esta cama por razones de seguridad. Para 
evitar lesiones y da os en la unidad, PROHIBIR saltar sobre ella.
* Este producto est dise ado para uso dom stico y no para uso comercial.
* # Recomendado de personas necesarias para el montaje 2 (sin embargo, siempre es mejor
tener una mano extra.) Estimar el tiempo de montaje es de 1,5 hora.
* Este manual de instrucciones contiene informaci n de seguridad importante. POR FAVOR LEA 
Y MANTENER PARA EL FUTURO.

ATTENTION:
* AVERTISSEMENT POUR LES JEUNES ENFANTS - Ce produit contient de petits composants, 
s'il vous pla t veiller

ce qu'ils sont tenus

l' cart des petits enfants. Les enfants de moins de 6 

ans, les petits nourrissons et les b b s ne doivent pas dormir sur ce lit pour des raisons de
s curit . Pour viter les blessures et les dommages

cet appareil, INTERDIRE sautant sur elle.

* Ce produit est con u pour un usage domestique et non destin

un usage commercial.

* # Recommand e de personnes n cessaires pour le montage 2 (mais il est toujours pr f rable
d'avoir un coup de main.) Estimation du temps de montage est de 1,5 heure.
* CE LIVRET CONTIENT DES INFORMATIONS IMPORTANTES SUR LA S CURIT . S'IL
VOUS PLA T LIRE ET CONSERVER POUR R F RENCE FUTURE.

Notice to be place on front cover of beds:

Keep your home and family safe
with the wall anchor kit that is
included with the product.

Serious or fatal crushing injuries can
occur from tipping furniture.

Secure Your Furniture

WARNING: Manufacturer assumes no liability 
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.

Do Not Return This Product!

Contact our customer service team for help first.

Call: 1-800-489-3351 (toll free) 

Monday-Friday 9am - 5pm CST

Visit: www.ameriwoodhome.com

We highly recommend having a 
professional assemble your 
product

WARNING:
* WARNING FOR YOUNG CHILDREN -
This product contains small components,
please ensure that they are kept away
from small children. Children under the
age of 6, small infants and babies must
not sleep on this bed for safety reasons.
To prevent injury and damage to this unit,
PROHIBIT jumping on it.
* This product is designed for home use
and not intended for commercial use.

Summary of Contents for 8368222COM


























































Reviews: