AmeriWater Heatsan 00HS208, Operation & Maintenance Manual

Page: 6 / 80

5
98-0156 Rev G
Explanation of symbols and references
This symbol refers to any immediate dangers. Failure to
follow the specified procedure could result in serious
personal Injury. Extreme caution should be observed
when conducting any activity where this symbol is shown.
Work should be completed by a trained competent
person.
Electrical shock. Do not touch electrical components.
Before performing tasks on parts of the electrical system,
disconnect the system from the power supply.
This symbol refers to a possible danger. Failure to follow
the specified procedure could result in personnel injury.
Caution should be observed when conducting any activity
where this symbol is shown. It is recommended work
should be completed by a trained competent person.
This symbol refers to a possibly hazardous situation.
Failure to observe these references may result in minor
injuries and/or damage to property.
I
This symbol points out important information for working
with the system in the proper manner. Failure to observe
these references may result in malfunctions in the system
or impact on the environment.
This symbol indicates a possible hot surface. Touching
parts of the machine showing this label should be
avoided.
Failure to observe these references may result in malfunctions in the
system or impact on the environment or result in injuries.
Additional safety requirements
National or provincial specific requirements/standards and regulations
must be observed.
Usage in accordance with intended purpose
This equipment is intended for indoor use only in a non-hazardous
environment to provide hot water, up to 194 °F for the purposes of
disinfection of water treatment equipment or other equipment.
Danger
Warning
Caution