- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2019
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M985010 (3/19)
• Make certain the SEAL
(1)
is properly seated in recess of
spout base.
• Insert all HOSES
(2)
and SHANK
(3)
through MOUNTING
RING
(4)
and mounting surface. Do not use putty.
• Insert HOSES
(2)
through RUBBER WASHER
(5)
, BRASS
WASHER
(6)
, and threaded LOCKNUT
(7)
.
• Assemble RUBBER WASHER
(5)
, BRASS WASHER
(6)
, and
threaded LOCKNUT
(7)
onto SHANK
(3)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(7)
.
• Use a screwdriver to tighten SCREWS
(8)
on LOCKNUT
(7)
.
Work your way around LOCKNUT
(7)
, tightening the screws
slightly each time until all are snug to ensure even pressure.
INSTALL FAUCET
Studio-S
®
Pull-Out Kitchen Faucet
INSTALLATION
INSTRUCTIONS
4803100
Flat Blade Screwdriver
Adjustable Wrench
Plumbers’ Putty or Caulking
Philips Screwdriver
Certified to comply with ANSI A112.18.1M
1
4
3
2
5
6
8
7
2
CAUTION
Turn off water at
main supply
