American Standard Retrospect Collection Pedestal Sink 0066.000 Specifications Download Page 1

J8

© 2008 AS America Inc.

RETROSPECT COLLECTION

®

PEDESTAL SINK

FIRE CLAY

RETROSPECT COLLECTION

®

 PEDESTAL SINK

•  Authentically styled rectangle pedestal
•  Made from fine fireclay
•  Generous deck area for toiletries
•  Hidden front overflow
•  Supplied with mounting kit
•  Right Height™ for greater comfort
• 

Part of design matched Retrospect Collection

®

 

0282.800 Faucet holes on 8" (203mm) centers 

Nominal Dimensions:
27" x 19-3/4" x 36"
(686 x 502 x 914mm)

Separate Components:

 

0282.008 Pedestal top 8" (203mm) centers

 

0066.000 Pedestal only 

Bowl sizes: 
15-1/2" (394mm) wide
12" (305mm) front to back
6-1/8" (156mm) deep

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous 
  Ceramic Fixtures
• CAN/CSA B45 Series

NOTES:

*

 DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE 

SUGGESTED.

 PEDESTAL ANCHORING SCREWS NOT INCLUDED.

 SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST 

BE TAKEN FROM FIXTURE.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the 

range of tolerances established by ANSI Standard A112.19.9.

These measurements are subject to change or cancellation. No responsibility  

is assumed for use of superseded or voided pages.

FINISHED WALL

PEDESTAL

SIDE SECTION

*

*

1-1/4 O.D.

WASTE

SUPPLIES

AS REQ'D

FINISHED

FLOOR

9"

(229mm)

19-3/4"

(502mm)

27"

(686mm)

8"

(203mm)

13-3/4"

(349mm)

3-3/8"

(86mm)

PED TOP

OUTLINE

1-3/4" DIA.

STD. DRAIN

OUTLET

3/8" (10mm) DIA.

BASE ANCHOR

SCREW HOLE

CENTER

3/8" (10mm) DIA.

SINK ANCHOR

SCREW HOLES

ON 13-3/4" (349mm)

CENTRES

36"

(914mm)

28-1/4"

(718mm)

7-1/4"

(184mm)

8-1/8" 

TO BOTTOM

OF DRAIN OUTLET

(206mm)

9-7/8"

(251mm)

24"

(610mm)

22"

(559mm)

1-1/4" O.D.
TAILPIECE

8"

(203mm)

3 Holes

1-3/8" (35mm) Dia.

15"

(381mm)

To Be Specified:

  Color: 

  White

  Recommended Faucet: 2373.701 

  Faucet Finish: 

  Supplies:

  1-1/4" Trap:

Revised 2/08

Reviews: