- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
RECOMMENDED TOOLS
M965936 Rev. 1.0 (12/18)
ROUGHING-IN DIMENSIONS
Quentin
™
Pressure Balancing
Bath and Shower Trim Kit
INSTALLATION
INSTRUCTIONS
TU440507
TU440508
Plumbers’ Putty
or Caulking
Adjustable Wrench
Channel Locks
Phillips Screwdriver
• To assure proper positioning in relation to wall.
Note roughing-in dimensions.
Teflon Tape
Flat Blade Screwdriver
CARTRIDGE INSTALLATION
1
1
1
2
6
5
3
4
UP
UP
BOTTOM OF TUB
4-13/16" REF.
(121 mm) REF.
1/2" COPPER
9-1/4"
(234 mm)
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' (1651 mm)
AND 80'' (1880 mm)
TOP OF TUB RIM
1-5/8" TO 3"
(41 mm TO 76 mm)
FINISHED WALL
4" (102 mm)
74" FOR HEAD
CLEARANCE
(188 cm)
18" OPTIONAL
(457 mm)
1/2" NPT
(12.7 mm) NPT
216 mm
(8-1/2")
REF.
125 mm
(4-7/8")
REF.
1-1/2" REF.
(38 mm) REF.
2-3/4" MAX. (69 mm)
1-3/4" MIN. (45 mm)
6-3/8"
(163 mm)
7-1/4"
(184 mm)
C
OFF
H
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.
• Remove PLASTER GUARD
(6)
(Keep it installed for thin wall Installation).
• Remove BONNET NUT
(1)
by unthreading it
Counter clockwise. Remove test CAP
(2)
.
• Remove PROTECTIVE HOUSING
(3)
from
CARTRIDGE
(4)
. Install with “UP” text on top.
• Reinstall BONNET NUT
(1)
onto VALVE BODY
(5)
and tighten firmly with 12 Nm or 9 lbs/ft.
NOTE:
Specified tightening torque
of BONNET NUT
(1)
is critical to
assure sealing function.