SINGLE CONTROL KITCHEN
PULL-OUT FAUCET with
EverClean™ Finish
LAKELAND
Installation
Instructions
Certified to comply with ANSI A112.18.1M
4114.100
1
3
7
A
B
CAUTION
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
Turn off hot and cold water
supplies before beginning.
P U T T Y
S P O U T B A S E
S I N K O R
M O U N T I N G
S U R FA C E
7
2
3
2
. 3 & 7
Assemble RUBBER WASHER
(4)
, BRASS WASHER
(5)
, and threaded LOCKNUT
(6)
onto SHANK
(3)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(6)
and check that rotation of HANDLE
(7)
from HOT to COLD
is centered.
Use a screwdriver to tighten SCREWS
(8)
on LOCKNUT
(6)
. Work your way around LOCKNUT
(6)
, tightening
the screws slightly each time until all are snug to ensure even pressure.
(A)
Installation with ESCUTCHEON
(1)
.
Apply a bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE
(1)
.
Insert supply HOSES
(2)
and SHANK
(3)
through hole of ESCUTCHEON with PUTTY PLATE
(1)
and mounting surface.
Follow mounting instructions below to secure faucet to mounting surface.
(B)
Installation less ESCUTCHEON
(1)
.
Discard ESCUTCHEON with PUTTY PLATE
(1)
.
Insert supply HOSES
(2)
and
SHANK
(3)
through mounting hole and
seat SPOUT BASE onto sink or mounting surface.
Do not use putty.
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
TOOLS REQUIRED
3FHVMBS4DSFXESJWFS
Congratulations on purchasing your American Standard faucet with
EverClean finish found only on American Standard faucets.
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel, Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
4
5
6
8
4
5
6
8
