HAMPTON™ 5’ INTEGRAL APRON
WHIRLPOOL
HIGH GLOSS ACRYLIC
HAMPTON™ 5’ INTEGRAL APRON WHIRLPOOL
❏
2425.218W Whirlpool featuring System I
Left Hand Drain Outlet
❏
2425.118W Whirlpool featuring System I
Right Hand Drain Outlet
• Acrylic with fiberglass reinforcement
• Integral apron with removable access panel
• Integral three-sided, tiling / water retention
flange
• Form-fitted backrest
• 1.5 HP single speed, self-draining pump/motor
with dry run seal
• Factory-installed power cord with plug
• Eight multi-directional and flow-adjustable jets
including:
- Two Ideal-flow jets
- Four body massage jets
- Two recessed back-rest jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater connection
system
• Factory installed and tested whirlpool system
StayClean™ Whirlpool Massage featuring System I
❏
2425.218WC Whirlpool featuring System I
Left Hand Drain Outlet
❏
2425.118WC Whirlpool featuring System I
Right Hand Drain Outlet
• Same as above except with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions:
60” x 32” x 21-1/2” (1524 x 813 x 546mm)
© 2003 American Standard Inc.
BV-19
3/03
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
To Be Specified - Required:
❏
Color:
❏
Bath Faucet: (specify finish)
❏
Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
Safe-T-Heater*: 9075.120
❏
Bath Caddie: 9533.100 (in Chrome only)
❏
Jet Trim Ring Kit: 9860.200-two per kit (specify finish)
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
