B27
© 2008 AS America Inc.
COLONY
PRESSURE BALANCE BATH/SHOWER FITTING
WITH FloWise
®
SHOWERHEAD
MODEL NUMBER:
TRIM KITS:
T375.128 Colony BATH/SHOWER Trim Kit
Lever Handle. FloWise Showerhead. L
ESS Valve Body.
T375.248 Colony BATH/SHOWER Trim Kit
Metal Lever Handle. FloWise Showerhead. L
ESS Valve Body.
T372.128 Colony SHOWER ONLY Trim Kit
Lever Handle. FloWise Showerhead. L
ESS Valve Body.
T372.248 Colony SHOWER ONLY Trim Kit
Metal Lever Handle. FloWise Showerhead. L
ESS Valve Body.
ROUGH VALVES:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
GENERAL DESCRIPTION:
TRIM KIT
FloWise water saving showerhead offers 40% water
savings at maximum 1.5gpm/5.7L/min. flow rate. Slip-on
diverter spout. Available with lever or metal lever handle.
Available in Bath/Shower and Shower Only combinations.
ROUGH VALVE BODY
Cast brass body, washerless ceramic disc valve cartridge
with back to back capability, and hot limit safety stop.
Cycles from “off” to “cold” to “hot”. Pressure balancing
cartridge maintains constant output temperature in
response to changes in relative hot and cold supply
pressure. 1/2" inlets and outlets (choice of direct sweat,
threaded, or PEX). Available with screwdriver stops.
Rough-in plaster guard designed for use as thin-wall
mounting adaptor.
T375.128 Bath/Shower Trim Shown
• Showerhead with 1.5gpm/5.7L.min. flow restrictor.
T375.128
Bath/Shower Trim Kit. Lever Handle. FloWise Showerhead. L
ESS Valve Body.
T372.248
Shower Only Trim Kit. Metal Lever Handle. FloWise Showerhead. L
ESS Valve Body.
Finish Options
Product
Number Description
T375.248
Bath/Shower Trim Kit. Metal Lever Handle. FloWise Showerhead. L
ESS Valve Body.
T372.128
Shower Only Trim Kit. Lever Handle. FloWise Showerhead. L
ESS Valve Body.
Polished
Chrome
002
R110
R110SS
Rough Valve Body less trim. Direct Sweat inlets/outlets.
Rough Valve Body less trim. Direct Sweat inlets/outlets with Screwdriver Stops.
R115
R115SS
Rough Valve Body less trim. Female Thread inlets/outlets.
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
R117
R117SS
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets.
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets with Screwdriver Stops.
TRIM KITS
*
Product
Number Description
ROUGH VALVE BODIES
*
TRIM & ROUGH MUST BE ORDERED SEPARATELY.
Meets the American Disabilities
Act Guidelines and
ANSI
A117.1 Requirements for the
physically challenged.
PRODUCT FEATURES:
Flowise Water Saving Showerhead:
Saves up to 40% in
water usage. Max. 1.5gpm/5.7L/min. flow rate.
Cast Brass Valve Body:
Durable - Quality that will last a
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge:
Assures a lifetime of
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge:
Maintains constant
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system engineered to eliminate
cross flow. Avoids failure due to mineral deposits - ideal for use
in hard water.
Back-to-Back Capability:
Hot and cold can be reversed
quickly and easily.
Adjustable Hot Limit Safety Stop:
Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard:
Plaster guard is designed to
protect valve during installation and serve as a mounting
plate for thin-wall installations. 2 piece design allows valve to
be tested prior to trim installation.
Wide Rough-in Range:
From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature water saving showerhead with Max. 1.5gpm/5.7L/min. flow rate.
Shall feature a cast brass body. Shall
feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure
balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature hot limit safety
stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit - American Standard Model #
T37_.____.____.
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R115SS)
PEX (STOPS) (R117SS)
103 mm
(4-1/16")
52 mm
(2-1/32")
104 mm
(4-1/16")
INLETS 1/2" NPT
1/2" PEX INLETS
(ASTM F1807)
149 mm
(5-7/8")
165mm
(6-1/2")
THREADED (R115)
INLETS
86 mm
(3-3/8")
INLETS
1/2" NPT
86 mm
(3-3/8")
SHR
1/2" NPT
TUB PORT
1/2" NPT
INLETS
103 mm
(4-1/16")
103 mm
(4-1/16")
INLETS 1/2" NOM.
COPPER SWEAT
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
51.5 mm
(2-1/32")
51 mm
(2")
SHR. 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R110SS)
SWEAT (R110)
VALVE BODY OPTIONS
103 mm
(4-1/16")
INLETS
1/2" NPT
149 mm
(5-7/8")
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
PEX (R117)
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)
109mm
(4-1/4")
FINISHED
WALL
TOP OF
TUB RIM
BOTTOM
OF TUB
1880mm
(74")
FOR HEAD
CLEARANCE
102mm
(4") REF.
41mm TO 83mm
(1-5/8" TO 3-1/4")
457mm
(18")
OPTIONAL
127mm
(5") REF.
38mm
(1-1/2)
152mm
(6")
102mm
(4")
REF.
178mm
(7") REF.
171mm
(6-3/4")
CODES AND STANDARDS
These products meet or exceed the
following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
2
4
6
8
Spout
100
80
60
40
20
