background image

CHANDLER™ APRON KITCHEN SINK

MODEL 7048 SERIES

Installation
Instructions

7 9 0 7 5 9 - 1 0 0   R E V   A

Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.

BEFORE YOU BEGIN...Unpack new sink and  inspect carefully for damage.  Replace the sink in its original 
packing carton to protect it until you are ready to begin installation.

Certified to comply with ANSI Z124.6
Patent Pending 
Observe local plumbing and building codes.

RECOMMENDED TOOLS & MATERIALS

Putty Knife
Pipe Wrench
Channel Locks
Drill

Phillips Screwdriver
Regular Screwdriver
Adjustable Wrench
Basin Wrench

Saber Saw
Plumbers' Putty or
     Caulking
Various Carpentry Tools

Tubing Cutter
Tape Measure
Hacksaw
Silicone Adhesive

M  

A   D   E     W   I   T   H

Product names listed herein are trademarks of American Standard Inc. unless otherwise noted.

Corian

®

 Dupont registered trademark

© American Standard Inc. 2004

PRODUCT REQUIREMENTS
Due to the special nature of this installation, American Standard recommends that an experienced cabinet 
maker build the new cabinet or modify an existing cabinet to achieve a satisfactory installation.
To ensure proper fit of the sink in the cabinet, we suggest you provide the cabinet maker with the actual sink 
that will be installed.

NOTES
The cabinet designs illustrated below are intended as suggestions only.  Your specific installation requirements 
may vary from those shown.

SINK DIMENSIONS

NOTE:  Tile recess is
designed to accept four
6" x 6" x 5/16" thick tiles
(by others). Secure tiles 
with silicone adhesive.

3/8
(10mm)


(51mm)

6-3/16

(157mm)

9-3/4

(248mm)

SEALING
COMPOUND

FRONT OF

CABINET

24-1/2

(622mm)

TILE RECESS

33 (838mm)

7-1/8

(181mm)

3-1/2
(89mm) DIA.

1-3/8 (35mm) DIA. 

HOLES TYP.

8-3/4

(222mm)

22

(558mm)

C/L

7048.804
4 HOLE
VARIATION

1-3/4
(44mm) DIA.

1-1/2
(38mm) REF.

36

(914mm)

4-1/2

(114mm)

9-1/2

(241mm)

1 (25mm) 
RAD. TYP.

CABINET DESIGN
The sink is designed to be installed with the apron exposed and the back of the apron flush against the front of
the cabinet.

Reviews: