K26
© 2006 American Standard Inc.
CHAMPION
®
SELECT
ELONGATED RIGHT HEIGHT™ TOILET
VITREOUS CHINA
Revised 5/06
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT:
Dimensions of fi xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
FINISHED WALL
19mm ± 6mm
(1 ± 1/4)
419mm
(16-1/2)
FINISHED
FLOOR
305mm
(12)
772mm
(30-3/8)
C/L OF OUTLET
83mm
(3-1/4)
216mm
(8-1/2)
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
362mm
(14-1/4)
264mm
(10-3/8)
16mm
(5/8)
873mm
(34-3/8)
489mm
(19-1/4)
SUPPLY
AS
REQ'D
254mm
(10)
152mm
(6)
254mm
(10)
356mm
(14)
*
To Be Specifi ed:
❏
Color:
❏
White
❏
Bone
❏
Silver
❏
Linen
❏
Black
❏
Seat: (please specify color)
❏
Champion
®
Slow Close Elongated #5325.010
❏
Rise & Shine Elongated #5324.019
❏
Laurel Elongated #5311.012
❏
Supply with stop:
CHAMPION
®
SELECT ELONGATED
RIGHT HEIGHT™ TOILET
❑
2057.212
• Vitreous china
• EverClean™ anti-microbial glaze
(available Summer 2006)
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features
Champion® Flushing System
performance platform
• 3" non-adjustable, fl apper-free fl ush valve
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect™ tank/bowl coupling system
• Trip lever color-matched to toilet
• Sweeping pier on bowl
• 100% factory fl ush tested
• 2 bolt caps
• 10 year warranty
❑
3225.016
Elongated Right Height™ Bowl
❑
4272.216
Tank
Nominal Dimensions:
772 x 489 x 873mm
(30-3/8" x 19-1/4" x 34-3/8")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specifi cation for
Non-Adjustability - July, 2003 revision
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
