background image

T050.210

6-11/16"

9-1/8"

1-11/16" to 2-1/2"

TRIM KIT for CENTRAL 

THERMOSTAT with VOLUME CONTROL

Installation

Instructions

M 9 6 8 4 1 7   R E V   1 . 1

Thank you for selecting American-Standard...the benchmark

of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

Certified to comply with ANSI A112.18.1M
ASSE 1016

ROUGHING-IN DIMENSIONS

Recommended Tools

Flat Blade Screwdriver

Phillips Screwdriver

Remove as much surface dirt and film using clear 
water and soft cotton cloth (as described above).
 
     Use any of the following to remove tough surface 
     film and build-up:
     Mild liquid detergents
     Clear ammonia free liquid glass cleaners
     Non-acidic, non-abrasive gentle liquid or fully
     dissolved powder cleansers mixed according to
     manufacturers directions.
     Non-abrasive liquid polishers

Once clean, rinse faucet again with clear water to 
thoroughly remove cleaner or polish and blot dry with
a soft cotton cloth. 

To keep your new faucet looking new, please follow
these simple care instructions:

DO:     

Simply rinse the faucet clean with clear water.

           Dry the faucet with a soft cotton cloth.

DO NOT:

 

           Do not use any abrasive cleaners, cloths, or 
           paper towels.
           Do not use any cleaning agents containing
           acids, polish abrasives, or harsh cleaners or
           soaps.

Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:

CARE INSTRUCTIONS:

Failure to follow these care instructions may
damage the Faucet's finish.

FINISHED
WALL

CL

100

TO

P /

 O

PE

N

Summary of Contents for Ceratherm T050.210










Reviews: