background image

K67

Revised 2/08

© 2008 AS America Inc.

CADET

®

 3 ROUND FRONT

ROUGH-IN TOILET 

VITREOUS CHINA

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

*

 DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: 

 Dimensions of fixtures are nominal and may vary within the range 

of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is 

assumed for use of superseded or voided pages.

CADET

®

 3 ROUND FRONT TOILET

  

2384.012

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)
•  EverClean

®

 surface inhibits the growth of  

stain- and odor-causing bacteria, mold,  

and mildew on the surface

• Features the 

Cadet

® 

3 Flushing System

• Space saving round front siphon action

  jetted bowl

• Fully-glazed 2-1/8" trapway with 2" ball pass

• Generous 9" x 8" water surface area

• Close-coupled tank with flat tank cover for 

  superior storage

• Oversized 3" flush valve with chemical 

  resistant flapper

• Chrome trip lever

• Speed Connect

®

 tank-to-bowl 

  coupling system

• Sanitary dam on bowl with four point 

  tank stabilization

• 2 color-matched bolt caps

• 100% factory flush tested

• 5 year warranty

  

3011.016

 Round Front Bowl

  

4021.016

 Tank

Nominal Dimensions: 

 

718 x 438 x 733mm (28-1/4" x 17-1/4" x 28-7/8")
Fixture only, seat and supply by others

Alternative Tank Configurations Available:

  

4021.500

 Tank complete with Aquaguard Liner

  

4021.600

 Tank complete with tank cover 

      locking device

  

4021.700

 Tank complete with Aquaguard Liner 

      and tank cover locking device

  

4021.800

 Tank complete with trip lever located 

      on right side

  

4021.900

 Tank complete with tank cover locking  

      device and trip lever located on right side

   

4021.950

 Tank complete with Aquaguard liner, 

tank cover locking devise, and trip lever on  

right side

 

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2M for Vitreous China Fixtures - 

  includes Flush Performance, Ball Pass Diameter, 

  Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power    

  Supplementary Purchase Specification for

  Non-Adjustability

To Be Specified:

 Color: 

 White  

 Bone  

 Silver  

 Linen  

 Black

  Seat: #5330.010 Round front Champion

®

 Slow Close   

     solid plastic seat and cover with easy lift off feature

   Seat: #5282.011 Round Front EverClean

®

 

solid  

plastic seat and cover

   Seat: #5320.110 EverClean

®

 Round Front Seat with 

Slow Close Snap-Off Hinges

  Supply with stop:

SEE REVERSE FOR ADDITIONAL ROUGHING-IN 
DIMENSIONS

Reviews: