- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M965801 Rev.1.2 (11/18)
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
AVERY
™
PULL-DOWN
KITCHEN & BAR FAUCET
INSTALLATION
INSTRUCTIONS
4901.300
4901.410
Flat Blade Screwdriver
Adjustable Wrench
Plumbers’ Putty or Caulking
Phillips Screwdriver
Certified to comply with ANSI A112.18.1M
B
(OPTIONAL)
A
SPOUT BASE
SINK OR
MOUNTING
SURFACE
SPOUT BASE
3
7
9
8
2
10
5
3
6
7
9
4
4
8
1
10
12
5
6
11
13
CAUTION
Turn off water at
main supply
(A) Installation less DECK ESCUTCHEON
• Make certain the SEAL
(10)
is properly seated in bottom recess of the SPOUT
(2)
. Insert supply HOSES
(3)
, SPRAY HOSE
(4)
and SHANK
(5)
through mounting hole and seat SPOUT BASE onto sink or mounting surface.
Do not use putty
.
• Insert HOSES
(3)
through RUBBER WASHER
(6)
, BRASS WASHER
(7)
, and threaded LOCKNUT
(8)
.
• Assemble RUBBER WASHER
(6)
, BRASS WASHER
(7)
, and threaded LOCKNUT
(8)
onto SHANK
(5)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(8)
.
• Use a screwdriver to tighten SCREWS
(9)
on LOCKNUT
(8)
. Work your way around LOCKNUT
(8)
, tightening the screws
slightly each time until all are snug to ensure even pressure.
(B) Installation with DECK ESCUTCHEON (optional)
• Make certain the SEAL
(10)
is properly seated in top recess of DECK ESCUTCHEON
(1)
and SEAL
(12)
is properly seated
in bottom recess of DECK ESCUTCHEON
(1)
.
Do not use putty.
• Screw in two THREAD RODS
(13)
onto bottom of DECK ESCUTCHEON
(1)
.
• Insert SUPPLY HOSES
(3)
, SPRAY HOSE
(4)
and SHANK
(5)
through hole of DECK
ESCUTCHEON
(1)
, and mounting surface.
• Follow mounting instructions above
to secure faucet to mounting surface.
Thread the MOUNTING NUTS
(11)
to
secure DECK ESCUTCHEON.
