Installation
Instructions
. 3 & 7
Certified to comply with ASME A112.18.1M
U.S. Patent No. 5,819,789
Roughing-in Dimensions
Turn off hot and cold water
supplies before beginning.
CAUTION
BIDET FAUCET INSTALLATION
Place MOUNTING NUTS
(1)
onto the VALVE BODIES
(2)
and insert VALVE BODIES
(2)
through outside
holes, from underside of the BIDET LEDGE. Drop the
RUBBER RING
(3)
over the VALVE BODIES
(2)
and
screw on the ESCUTCHEON
(4)
until it locks against
the internal stop.
Tighten the MOUNTING NUT
(1)
to secure the
VALVE BODY
(2)
.
Replace UPPER GASKET
(7)
and FRICTION RING
(10)
.
Position the side threaded outlet rearward and secure
MOUNTING NUT
(9)
. Thread ESCUTCHEON
(5)
onto
TRANSFER VALVE
(8)
until it seats against the
BIDET LEDGE.
Remove MOUNTING NUT
(9)
, FRICTION RING
(10)
and UPPER GASKET
(7)
from TRANSFER VALVE
(8)
and insert into the center forward hole of BIDET.
COLD
HOT
BIDET
LEDGE
3
4
2
7
8
1
9
10
5
BIDET OUTLINE
IS SYMBOLIC
FINISHED
WALL
1-1/4 O.D. TAILPIECE
ADJ. 1-1/4
TO 2-1/4
3-7/8
5-1/2
1-3/8
DIA.
7/8 DIA.
TRANSFER VALVE (FOR FLUSHING
RIM OR SPRAY)
DOUCHE SPRAY
2-1/8
DIA.
8391.000
BIDET FITTING
FINISHED
FLOOR
DIVERTER AND
VACUUM BREAKER
ASSEMBLY
1-1/4 MAX.
1-3/16 DIA.
(C)
(H)
4-1/4
FOR GROUND JOINT
CONNECTION OR 1/2 "
O.D. SLIP (INLETS)
REAR VIEW WITH
WALL REMOVED
8 TO 12
2-1/4
DIA.
Congratulations on purchasing your American Standard faucet
with EverClean finish found only on American Standard faucets.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
with
EverClean™ Finish
*Hex key
*Wrench
*Supplied with Fitting
Flat Blade Screwdriver
Adjustable Wrench
Channel Locks
Phillips Screwdriver
Required Tools
5VCJOH$VUUFS
EverClean Finish
• One wipe effortlessly removes spots
• Eliminates the need for cleaners and scrubbing
• Permanent surface protectant remains beautiful
for the life of the faucet
• EverClean™ available on: Polished Chrome, Satin Nickel,
Stainless Steel, Polished Brass (or any combination of these finishes)
