Step 1:
Using a trim panel removal tool, carefully pry between the
front sidemarker light and the bumper to release the clip.
Slide the sidemarker light out to remove from the bumper.
Step 3:
Connect the factory sidemarker connector into the new
light, and push in the red tab to secure.
Installation Instructions for 2015-2018 Challenger Front LED Sidemarker Lights
Step 2:
Unlock the red retaining clip, press and release the factory
wiring connector from the factory light.
Step 4:
Insert the locating tab into the bumper, and then carefully
press the light until it clicks into place securing it to the
bumper.
CH3215
CH3216
