American Megatrends Super Voyager VLB-III, User Manual, Page: 53 / 138

Super Voyager VLB-III ISA Motherboard User's Guide
63
Step 9 Connect Cables
When connecting chassis connectors to the motherboard, make sure to connect the correct connector end.
Most connector wires are color-coded. Match the color of the wires leaving the switch or LED to the same
pin on the connector end.
There may be more than one connector with the same color-coded wires. If so, follow the wire to the switch
or LED.
All motherboard components are outlined by a white rectangular box with a broad arrow at one end. Pin 1 is
always at the arrow end of the white outlined box, as shown in the following drawing.
The following cables should be connected to the motherboard:
• Password LED cable to J38,
• Green PC power switch to J3,
• Green PC feature connector to J47,
• Reset Switch cable to J32,
• Speaker cable to J27,
• Keyboard Lock cable to J31,
• Turbo LED cable to J40,
• External Battery connector to J10,
• Turbo Switch cable to J33, and
• IDE LED Activity Indicator LED cable to J2.