American Megatrends Super Voyager VLB-III, User Manual, Page: 125 / 138

AMIFlash, Continued
Super Voyager VLB-III ISA Motherboard User's Guide
115
Message Explanation
Key to Exit message when a fatal error
occurs, for example, no Flash
EPROM present in system or the
hardware is not accessible.
Press Any
Key to
ReBoot
Displayed after successful
Flash EPROM programming.
Want to
Continue?
Displayed after an error
message.
Want to Exit
(Y/N)?
Displayed when you press <Esc>.
Please
Wait..
Displayed when Flash
programming is occurring.
Put Off
System Power
Displayed if there is an error
during Flash programming.
Replace the Flash EPROM with a
new programmed Flash EPROM.
No Flash
EPROM
present
Displayed if no Flash EPROM is
present in the system.
Memory
Allocation
Error
Displayed when scratch memory
is not available.
File
Creation
Error
Displayed when the specified
BIOS save file could not be
created.
File Does
Not Exist
Displayed when the Flash EPROM
program file could not be
found.
File I/O
Error
Displayed during a read or
write error.
Disk Full Displayed when the disk where
the existing BIOS was to be
saved has no space.
Flash EPROM
Programming
Error.
Displayed if an error occurs
during Flash programming. The
system is not usable unless the
existing Flash EPROM is
replaced with the new
Programmed Flash EPROM.
BIOS File
Not Of
Proper Size
Displayed when the file size of
the new program does not match
the Flash EPROM size.
Flash EPROM
Programming
The system is not usable until
Flash EPROM programming is