manualshive.com logo in svg

American Megatrends Super Voyager VLB-III, User Manual, Page: 12 / 138

Share
Download
American Megatrends Super Voyager VLB-III User Manual Download Page 12

Chapter 1 System Overview

6

Description,

 Continued

System BIOS

The Super Voyager VLB-III motherboard has a 64 KB WinBIOS at F0000h - FFFFFh with built-in
WinBIOS Setup. WinBIOS Setup has a graphical user interface that is extremely easy to use. WinBIOS
Setup allows you to bypass error messages for missing video, keyboard, or floppy drives to facilitate the
building of file servers. The system BIOS is stored in Read-Only Memory (ROM).

CMOS RAM

The Super Voyager VLB-III motherboard has 128 bytes of nonvolatile CMOS RAM with a built-in 3.6V
rechargeable NiCad battery backup for configuration.

Real Time Clock

The Super Voyager VLB-III motherboard has a real time clock and CMOS RAM with a built-in 3.6V
rechargeable NiCad battery backup.

Timer Features

The Super Voyager VLB-III motherboard has five programmable 16-bit counter/timers.

Refresh Generation

The Super Voyager VLB-III motherboard has a refresh generation feature.

I/O Capability

The Super Voyager VLB-III motherboard accesses 16- or 8-bit I/O devices on the ISA bus.

Summary of Contents for Super Voyager VLB-III











































































































































Reviews:

No comments