American Megatrends Super Voyager VLB-III, User Manual, Page: 105 / 138

Super Voyager VLB-III ISA Motherboard User's Guide
95
Power Management Setup, Continued
Power Supply Timeout
This option can be used to control a Green PC-capable power supply (such
as the SENSTRON GP2-4200F power supply). When this option is set to
Enabled, the power supply can be placed in Green PC poser savings mode
when the timeout period specified in the System Event Timer option
expires via the J3 output. The settings are Disabled or Enabled. The
Optimal and Fail-Safe default settings are Disabled.
Before this option is set to
Enabled,
the
System Event Timer
option
setting should be a value between
1 Min
and
15 Min.
and the
Stop Clock
Mode option should be set to Enabled.
Power supplies that support a timeout feature provide a cable with a
two-pin berg header, often called the Auxiliary Power Connector.
Usually, the black wire is Ground and the Green wire is the active
signal. Connect the black wire to Pin 1 of J3. Connect the Green wire to
Pin 2 of J3 on the motherboard.
If the VGA adapter card and monitor do not support DPMS (the VESA
Display Power Management Specification), you can connect the VGA monitor
to the auxiliary output of a Green PC power supply. When the length of
time specified in the System Event Timer option time period has expired,
AMIBIOS turns off any device connected to the auxiliary connector.
Green PC power supplies usually identify the power connectors that can
be turned off in Green PC mode.
This option is only supported if an S-Series Intel CPU is installed on
the motherboard.