American Megatrends Super Voyager VLB-III, User Manual, Page: 103 / 138

Super Voyager VLB-III ISA Motherboard User's Guide
93
Power Management Setup
Power Management Setup options are displayed by choosing the Power Mgmt
icon from the WinBIOS Setup main menu (see page 76). All Power
Management Setup options are described in this section.
Display Timeout
Power to the system monitor can be controlled when this option is set to
Enabled
and an American Megatrends CBL-SUB-12-10 cable is connected
between J47 on the motherboard and the feature connector on a VGA
adapter card. The setting of the System Event Timer option specifies the
timeout period before the system monitor power is turned off. The
settings for this option are Disabled or Enabled. The Optimal and Fail-
Safe default settings are Disabled.
Both the system monitor and the VGA adapter card must be VESA DPMS
(Display Power Management Specification)-aware. The VGA feature
connector on the VGA adapter card must be able to go into Input Mode. If
using a standard VGA monitor that is not DPMS-aware, you can achieve the
same type of power savings by setting the
Power Supply Timeout
option
(see page 95).
This option is only supported if an S-Series Intel CPU is installed on
the motherboard.
Before this option can be set to
Enabled,
the System Event Timer option
setting must be a value between
1 Min
and
15 Min.
and the Stop Clock
Mode option must be set to Enabled.