background image

APPENDIX 

                         IB892 User’s Manual 

45 

 

File of the W627UHG.H 
//--------------------------------------------------------------------------- 
//                                                                            
// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY     
// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE       
// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR     
// PURPOSE.                                                                   
//                                                                            
//--------------------------------------------------------------------------- 
#ifndef __W627UHG_H 
#define __W627UHG_H  

 

//--------------------------------------------------------------------------- 
#define 

W627UHG_INDEX_PORT 

 

(W627UHG_BASE) 

#define 

W627UHG_DATA_PORT 

 

(W627U1) 

//--------------------------------------------------------------------------- 
#define 

W627UHG_REG_LD 

 

 

0x07 

//--------------------------------------------------------------------------- 
#define W627UHG_UNLOCK  

 

0x87 

#define 

W627UHG_LOCK 

 

 

0xAA 

//--------------------------------------------------------------------------- 
unsigned int Init_W627UHG(void); 
void Set_W627UHG_LD( unsigned char); 
void Set_W627UHG_Reg( unsigned char, unsigned char); 
unsigned char Get_W627UHG_Reg( unsigned char); 
//--------------------------------------------------------------------------- 
#endif 

//__W627UHG_H 

 
 

Summary of Contents for IB892

























































Reviews: