EXTENDING HYBRID 2 KITS:
NOTE: When connecting multiple Hybrid 2 Kits together, do not
exceed the maximum run length as noted by the tag on the cord:
150 feet maximum
1. Turn the plastic end cap counter-clockwise to remove from the first kit.
2. Remove power cord from the second kit.
3. Connect the kits by plugging the male and female halves into each other.
4. Repeat steps 1, 2, and 3 for any additional kits.
5. Turn the plastic end cap clockwise until it is firmly tightened and secured
on the end of the last kit.
MOUNTING WITH MOUNTING CLIPS:
1. Attach mounting clips provided using nails or screws. Be sure that the mounting
surface is mechanically sound.
2. Mounting clips should be evenly spaced and be a maximum of 12 inches apart.
3. Make sure that the distance between two separate/nearby lines of Hybrid 2 Kits
are at least 1/2” apart to ensure proper heat distribution.
MOUNTING WITH TRACK OR CHANNEL (H2-TRACK-3 OR H2-CHAN-3 SOLD SEPARATELY):
1. Using appropriate fasteners, attach mounting track to mechanically sound surface.
2. Gently press Hybrid 2 Kit onto track so that it snaps into place.
DO NOT TWIST/ HAND VERTICALLY, SUSPEND UNSUPPORTED IN THE MIDDLE, OR BEND ALONG SHORT SIDE
PROP 65 WARNING:
Handling the coated electrical wires of this product exposes you to lead, a chemical known to the State of California to cause
cancer, birth defects, and other reproductive harm. Wash hands after use.
LED HYBRID 2 KITS
Installation instructions for H2-KITS Series
120V AC, 60Hz operation
RV1621
www.americanlighting.com
PAGE 1 OF 2