RM4200 Series User Guide
Configuration
40
b
Enable or disable the
AC Current Density Alarm
for the coupon.
c
Enter or adjust the
Alarm Value
. This is the value at which an alarm is sent to your Bullhorn Web
account.
3
If a transducer is installed with the test station, enter or adjust the values in both the
Input Max
and
Transducer
fields.
N
OTE
:
If using the AC Drain Current Transducer reading for other purposes then measuring current, the
Measurement Label
for the AC Drain Current displayed value on Bullhorn Web can be changed to a
different unit of measurement.
4
For the instant off, enter or adjust the
IOX Edge Offset
field (in milliseconds).
5
Click
Save
to save settings or
Cancel
to clear all fields.
Selecting Reading Measurement Schedules
Complete the following steps to select one or two schedules for the Readings measurement.
1
Click
Readings
. The
Readings
window displays.
Figure 3-22. Readings
2
For each Reading, select either
Schedule 1
and/or
Schedule 2
for the measurements. If no schedules are
selected, the Reading will be disabled.
