background image

Schematic Diagrams 

See our Parts Listing and Price sheet for complete identification of parts. 

Terms & Conditions of Sale 

Aquamatics’ responsibility ceases upon delivery to any common carrier. Aquamatics does not, unless under previous written agreement, 
insure shipments beyond the point of delivery to such carrier. CLAIMS OF LOST OR DAMAGED PRODUCTS IN TRANSIT SHALL BE FILED BY THE 
CUSTOMER DIRECTLY TO THE CARRIER. Aquamatics shall not be responsible for delays resulting from strikes, accidents, negligence of carri-
ers, or any other causes beyond our control. Aquamatics may, during a period of shortage due to causes beyond its control prorate the supply 
of its products among all of its customers in such a manner as may be deemed equitable at the sole discretion of Aquamatics. 
Materials must not be returned unless consent has first been obtained in writing from the Liverpool, New York office. Aquamatics reserves the 
right to refuse acceptance of deliveries of materials returned without this consent. All returns of saleable goods will be subject to a 25% 
restocking/handling charge. All authorized returned goods must be shipped prepaid by the customer. 

8.99 

Summary of Contents for Aquamatics Aquamate







Reviews: