background image

SPEEDDOME ULTRA VIIE DAY/NIGHT CAMERA DOME CONFIGURATION UTILITY 

8200-0184-12, REV. A 

OPERATOR’S MANUAL SUPPLEMENT 

13 of 15

 

Specifications-Indoor Dome 

Operational 

Pan/Tilt: 

Manual Pan Speed .........................0.2°-100° per second 
 

(scaled to zoom position) 

Manual Tilt Speed......................... 0.25°-100° per second 
 

(scaled to zoom position) 

Preset Pan/Tilt Speed............ 220° per second maximum 
Pan Travel ................................. 360° continuous rotation 
Tilt Travel................................................................ >100° 
Pan/Tilt Accuracy..................................................... ±0.5° 

23x Day/Night

 Camera Zoom Functions: 

Optical Zoom ............................................................. 23X 
Digital Zoom .............................................................. 10X 
Zoom Pause ......................................... 23X selectable or 
 35X 

default 

Total Zoom .............................................................. 230X 
Maximum Zoom Stop....... 46X, 69X, 92X (default), 115X, 
 

138X, 161X, 184X, 207X, 230X 

Zoom/Focus Accuracy ........................................... ±0.5% 

Auto Synchronization: 

Line Locked ........................ Remote V-phase adjustment 
Internal.......................................... Built-in sync generator 
Address Range....................................................... 1-255 

Number of Presets: 

VM16 / ADTT16........................... 96 with SensorNet 485 
VM32 / AD32 ............................... 96 with SensorNet 485 
AD2150..............................................64 with Manchester 
 

16 with RS-422 (using AD2083-02A) 

VM96 .................... Virtual with RS-422 or SensorNet 485 
VM168 / AD168 ................................64 with Manchester, 
 

RS-422 or SensorNet 

 

16 with RS-422 (using AD2083-02A) 

AD2050..............................................64 with Manchester 
 

16 with RS-422 (using AD2083-02A) 

Direct View™ Access Time ...........<1 second to position. 
 

Full zoom in <4 seconds. 

 

Focus on VM16, VM32 and 

 

VideoManager systems is <1 second. 

 

Focus on VM96 and RV2715 systems 

 

is <7 seconds 

Programmable Patterns 

Number Patterns...........................................................16 

Storage 

Program Storage ................ 256 Kbytes of Flash memory 
Data Storage .................................. 128 Kbytes of SRAM 

Configuration Menu 

Languages ................English, French, German, Spanish, 
 

Italian, and Portuguese 

Electrical 

Input Voltage.....................................18-30Vac, 50/60 Hz 
 

UL Class 2 LPS 

Design Tolerance ..............................16-36Vac, 50/60 Hz 
Power Consumption......................................... 16W max. 
Current ........................................................... 0.85A max. 
Allowable Drop Out ............................................... 100ms 
Power On In-Rush Current........................................1.5A 

Surge Protection: 

Video Output ............................... Low capacitance Zener 
 

suppressor 6.5V, 1500W 

Power Line ......................... TVS rated at 60V, 1.5 joules, 
 

250A 8/20µs impulse 

RS-422.......................................... TVS rated at 9.8V/1A, 
 20V/25A, 

500W, 

 8/20µs 

impulse 

Manchester/ 
SensorNet 485 .................... Gas discharge tube rated at: 
 

8/20µs impulse discharge current 

 

of 10kA, ten 8/20µs impulse 

 

discharge current of 5kA 

 

Isolation transformer coupled 2000Vrms 

 

PTC fuse protects transformer. 

 

TVS rated at 9.8V/1A, 20V/25A, 

 

500W, 8/20µs impulse 

Alarm Input.................................... TVS rated at 9.8V/1A, 
 

20V/25A, 500W, 8/20µs impulse 

Alarms Inputs/Control Outputs: 

When no I/O board is used: 

Inputs ........................................ 1 dry contact/3.5mA sink 
Outputs ......................................... 1 open collector driver 
 

@ 12Vdc, 40mA 

When I/O board is used: 

Inputs ...................................... 4 dry contacts/3.5mA sink 
Outputs ....................................... 4 open collector drivers 
 

@ 12Vdc, 40mA 

Environmental 

Operating Temperature........ –10° to 50°C (14° to 122°F) 
Relative Humidity .....................0 to 95% non-condensing 
Storage Temperature ................................ –20°C to 65°C 
 

(–4°F to 149°F) 

Summary of Contents for SpeedDome Ultra VIIE
















Reviews: