manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII, Operator'S Manual, Page: 88 / 114

Share
Download
American Dynamics SpeedDome Ultra VII Operator'S Manual Download Page 88

C-2 

SpeedDome Ultra VII Operator's Manual

 

Supported SpeedDome Ultra VII Features 

The following SpeedDome Ultra VII features are supported with Coaxitron and P protocols: 

• 

11X digital zoom (up to 242X total zoom) 

• 

85 Total Presets (1-32, 35-87)   

• 

3 Patterns 

• 

16 Areas 

• 

4 Alarm Inputs and Outputs 

• 

8 Privacy Zones 

• 

Programmable Names (camera, preset, pattern, areas, and alarms) 

• 

Open Shutter settings 

• 

Proportional Flip 

• 

Direction Indicator display 

• 

Multi-language Dome Configuration Utility (available in English, French, German, 
Italian, Portuguese, and Spanish) with Password Protection 

Unsupported SpeedDome Ultra VII Features 

The following SpeedDome Ultra VII features are not supported with the Pelco Coaxitron and 
“P” protocols: 

• 

 

 

Save and exit from configuration menus using 

Iris Close

 and 

Focus

 keys 

• 

 

 

Apple Peel pattern (default SpeedDome pattern) 

• 

 

 

V-Phase adjustment 

Summary of Contents for SpeedDome Ultra VII



















































































































Reviews:

No comments