manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII, Operator'S Manual, Page: 59 / 114

Share
Download
American Dynamics SpeedDome Ultra VII Operator'S Manual Download Page 59

Configuring Text Displayed On-Screen 

5-5

 

Displaying Diagnostic Tests During Reset 

You can choose to have dome diagnostic tests run whenever the dome resets. The diagnostic 
information displayed includes: 

• 

Communications Loopback Test 

• 

Camera Loopback Test 

• 

Motor Circuit Test.  

If you do not want diagnostic information to appear when the dome resets, a screen 
displaying the firmware version numbers for the Boot and Application code and the 
maximum optical zoom for the dome appears. 

 

 

 

I M P O R T A N T  

Enabling diagnostic tests may cause a momentary loss of communication on the network 
when the dome diagnostics are executed.  

 

 

 

Changing the Display of Diagnostic Information 

1. Select 

On-Screen Text Display

 from the 

Dome Configuration Menu

. 

2.  Move the highlight to 

Diagnostic Display

. 

3.  Change the setting. 

• 

If you want diagnostic tests to run when the dome resets, select On. 

• 

If you do not want diagnostic tests to run when the dome resets, select Off. This 
choice displays the firmware versions whenever the dome resets. 

The default setting is Off. 

4. Select 

Exit

. The 

Dome Configuration Menu

 appears. Continue with 

What To Do Next

 

on page 5-14. 

Summary of Contents for SpeedDome Ultra VII



















































































































Reviews:

No comments