manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII, Operator'S Manual, Page: 57 / 114

Share
Download
American Dynamics SpeedDome Ultra VII Operator'S Manual Download Page 57

Configuring Text Displayed On-Screen 

5-3

 

Displaying or Hiding Status Information 

You can choose to display the status of the zoom setting, auto focus, and auto iris. This 
information will appear in the upper left corner of the monitor. The information only appears 
when there is a change in the status of any item and remains on the screen for 5 seconds. If 
“D” appears next to the zoom factor, the digital zoom is active (zooms greater than 22X). 

Figure 5-1: Example of Zoom, Auto Focus and Auto Iris Status Information 

ZOOM X 92 D

AUTO IRIS OFF

AUTO FOCUS ON

 

 

 

 

 

Note:

 Displaying status information is separate from displaying name information. If the 

Disable All Names?

 setting is set to 

Yes

, the status information still appears if 

Status 

Display

 is set to 

On

. 

 

 

 

Changing the Display of Status Information 

 

1. Select 

On-Screen Text Display

 from the 

Dome Configuration Menu

. 

 

The highlight bar appears on 

Status Display

. 

2.  Change the setting. 

• 

Select 

On 

to display dome status information on the monitor. 

• 

Select 

Off

 to prevent dome status information from appearing on the monitor. 

The default setting is Off. 

3. Select 

Exit

. The 

Dome Configuration Menu

 appears. Continue with 

What To Do Next

 

on page 5-14. 

Summary of Contents for SpeedDome Ultra VII



















































































































Reviews:

No comments