manualshive.com logo in svg

American Dynamics SpeedDome Ultra VII, Operator'S Manual, Page: 56 / 114

Share
Download
American Dynamics SpeedDome Ultra VII Operator'S Manual Download Page 56

5-2 

SpeedDome Ultra VII Operator's Manual

 

Overview of On-Screen Text Display Settings 

When 

On-Screen Text Display

 is selected from the 

Dome Configuration Menu

, the 

following screen appears: 

ON-SCREEN TEXT DISPLAY

STATUS DISPLAY

ON/OFF

DISABLE ALL NAMES?

YES/NO

DIAGNOSTIC DISPLAY

ON/OFF

DIRECTION INDICATOR

ON/OFF

NAME CONFIGURATION MENU

TEXT ATTRIBUTE OPTIONS

EXIT

 

Use this screen to display dome status information, enable or disable the display of all name 
information, display diagnostic information after a dome reset, and display direction 
information about where the dome is pointing. You may also start the 

Name Configuration 

Menu

 and the 

Text Attribute Options

 screens.  

• 

To change the settings, move the highlight bar to appropriate field and make the changes. 

• 

To return to the 

Dome Configuration Menu

, select 

Exit

.  

 

Summary of Contents for SpeedDome Ultra VII



















































































































Reviews:

No comments