American Dynamics SpeedDome Optima Quick Reference Manual Download Page 8

 

RASO AND RASI SERIES SPEEDDOME OPTIMA 

8000-2692-13, REV. C 

QUICK REFERENCE GUIDE 

8 of 8

 

 

Declarations 

Regulatory Compliance 

Emissions

.................................... 47 CFR, Part 15 

 ICES-003 
 

EN55022 Class A (CE) 

Immunity

......................................EN50130-4 (CE) 

Safety

.......................................................... UL1950 

 

CSA C22.2 No 950 

 

EN 60 950 

 

Outdoor model meets NEMA 5 and IP-66 

FCC COMPLIANCE:

 This equipment complies with Part 15 of the 

FCC rules for intentional radiators and Class A digital devices when 
installed and used in accordance with the instruction manual. Following 
these rules provides reasonable protection against harmful interference 
from equipment operated in a commercial area. This equipment should 
not be installed in a residential area as it can radiate radio frequency 
energy that could interfere with radio communications, a situation the 
user would have to fix at their own expense. 

EQUIPMENT MODIFICATION CAUTION:

 Equipment changes or 

modifications not expressly approved by Sensormatic Electronics 
Corporation, the party responsible for FCC compliance, could void the 
user's authority to operate the equipment and could create a hazardous 
condition. 

 

Other Declarations 

Thank you for using American Dynamics products. We support our 
products through an extensive and worldwide network of dealers. The 
dealer, through whom you originally purchased this product, is your 
point of contact if you have a need for service or support. Our dealers 
are fully empowered to provide the very best in customer service and 
support. Dealers should contact American Dynamics at (800) 507-6268 
or (561) 912-6259 or on the web at www.americandynamics.net. 

NOTICE: 

The information in this manual was current when published. 

The manufacturer reserves the right to revise and improve its products. 
All specifications are therefore subject to change without notice. 

LIMITED RIGHTS NOTICE:

 For units of the Department of 

Defense, all documentation and manuals were developed at private 
expense and no part of it was developed using Government Funds. The 
restrictions governing the use and disclosure of technical data marked 
with this legend are set forth in the definition of “limited rights” in 
paragraph (a) (15) of the clause of DFARS 252.227.7013. Unpublished - 
rights reserved under the Copyright Laws of the United States. 

TRADEMARK NOTICE:

 

SpeedDome

American Dynamics

, and 

the 

American Dynamics

 logo are trademarks or registered 

trademarks of Sensormatic Electronics Corporation. Other product 
names (if any) mentioned herein may be trademarks or registered 
trademarks of other companies. 

COPYRIGHT:

 Under copyright laws, the contents of this manual may 

not be copied, photocopied, reproduced, translated or reduced to any 
electronic medium or machine-readable form, in whole or in part, 
without prior written consent of Sensormatic Electronics. 

BSL 6/2004 

www.americandynamics.net

Summary of Contents for SpeedDome Optima









Reviews: