SENSORRAIL IIIE
8200-0593-03, REV. A
SERVICE GUIDE
28 of 34
Antenna Bracket Replacement
Plastic bracket ADRL3RXBRK enables the RF
receive antenna to be placed inside or outside the
structure depending on installation requirements.
Note:
The installation kit contains hardware to
mount the receive antenna to the black bracket.
Ensure the bracket is installed so the antenna is in
line with the transmit antenna of the trolley.
1. Insert the bracket 15cm into the rail. This
bracket enables the antenna to be easily moved
to where the least number of RF holes exist.
2. If RF holes cannot be eliminated, move the
antenna to the outside of the rail.
3. Ensure that the RF antenna does not receive
transmissions from another system. If it does,
select a different transmission frequency.
RF Link DIP Switch Settings
If 2.4GHz devices interfere with the SensorRail,
select one of the following alternate frequencies
using the four-position DIP switch located on the
transmitter board of the trolley.
DIP Switch
Channel 1
2
3
4
Channel 1
(2414.5MHz)
ON OFF OFF OFF
Channel 2
(2428.5MHz)
OFF ON OFF OFF
Channel 3
(2442.5MHz)
ON ON OFF OFF
Channel 4
(2456.5MHz)
OFF OFF ON OFF
Channel 5
(2470.5MHz)
ON OFF ON OFF
