RASO AND RASI SERIES SPEEDDOME OPTIMA
8000-2692-13, REV. B1
QUICK REFERENCE GUIDE
6 of 6
Manchester Commands
These commands are supported by systems using
the Manchester protocol.
See
for button names
used on specific keyboards.
Verified with AD2050, AD2091, and AD168 with CCM
(v. 3.01)
Dome Function
Keyboard Command
Program Presets 1 - 64
1- 64 Set Preset
Call Presets 1 - 64
1- 64 Call Preset
Program Pattern 1
70 Set Preset
Program Pattern 2
71 Set Preset
Program Pattern 3
72 Set Preset
Save Pattern
Programming
69 Set Preset
Cancel Pattern
Programming
68 Set Preset
Repeats following pattern
69 Call Preset
Run Pattern 1
70 Call Preset
Run Pattern 2
71 Call Preset
Run Pattern 3
72 Call Preset
Reset Dome
65 Set Preset
Resume Auto Focus / Auto
Iris
66 Call Preset
Flip (Rotate dome 180º)
67 Call Preset
Activate / Deactivate
V-phase delay setting
adjustment
67 Set Preset
Declarations
Regulatory Compliance
Emissions
.....................................47 CFR, Part 15
ICES-003
EN55022 Class A (CE)
Immunity
...................................... EN50130-4 (CE)
Safety
......................................................... UL1950
CSA C22.2 No 950
EN 60 950
Outdoor model meets NEMA 5 and IP-66
FCC COMPLIANCE:
This equipment complies with Part 15 of the
FCC rules for intentional radiators and Class A digital devices when
installed and used in accordance with the instruction manual. Following
these rules provides reasonable protection against harmful interference
from equipment operated in a commercial area. This equipment should
not be installed in a residential area as it can radiate radio frequency
energy that could interfere with radio communications, a situation the
user would have to fix at their own expense.
EQUIPMENT MODIFICATION CAUTION:
Equipment changes or
modifications not expressly approved by Sensormatic Electronics
Corporation, the party responsible for FCC compliance, could void the
user's authority to operate the equipment and could create a hazardous
condition.
Other Declarations
Thank you for using American Dynamics products. We support our
products through an extensive and worldwide network of dealers. The
dealer, through whom you originally purchased this product, is your
point of contact if you have a need for service or support. Our dealers
are fully empowered to provide the very best in customer service and
support. Dealers should contact American Dynamics at (800) 507-6268
or (561) 912-6259 or on the web at www.americandynamics.net.
NOTICE:
The information in this manual was current when published.
The manufacturer reserves the right to revise and improve its products.
All specifications are therefore subject to change without notice.
LIMITED RIGHTS NOTICE:
For units of the Department of
Defense, all documentation and manuals were developed at private
expense and no part of it was developed using Government Funds. The
restrictions governing the use and disclosure of technical data marked
with this legend are set forth in the definition of “limited rights” in
paragraph (a) (15) of the clause of DFARS 252.227.7013. Unpublished -
rights reserved under the Copyright Laws of the United States.
TRADEMARK NOTICE:
SpeedDome
,
American Dynamics
, and
the
American Dynamics
logo are trademarks or registered
trademarks of Sensormatic Electronics Corporation. Other product
names (if any) mentioned herein may be trademarks or registered
trademarks of other companies.
COPYRIGHT:
Under copyright laws, the contents of this manual may
not be copied, photocopied, reproduced, translated or reduced to any
electronic medium or machine-readable form, in whole or in part,
without prior written consent of Sensormatic Electronics.
BSL 4/2004
www.americandynamics.net
