Intellex
®
Digital Video Management System Installation and Operating Instructions
39
Schedule Setup
MORE>>>
Regular Schedule Setup
Use the Regular Schedule Setup screens to use the same schedule
for all cameras. The unit uses the same schedule for weekdays,
weekends and holidays. Daytime operation begins at the set start
time and switches to nighttime operation at its start time.
Select the
Use Regular Schedule
option. The unit displays the
Rate/Quality
,
Time
,
Cameras 1–8
,
Data Lifetime
tabs, and
removes all other tabs.
Click
OK
to accept the new schedule mode, as well as any
changes on the other Regular Schedule Setup screens, and return
to the
Setup Options
screen. Click
Cancel
to cancel the changes
and return to the
Setup Options
screen.
Regular Rate/Quality Setup
Use the
Rate/Quality
screen to set the record rate and quality for
normal operation.
Rate —
Select the record rate in ips (images per second) for
regular operation. The actual record rate is affected by motion
and other factors. The default is
30 ips
(
25 ips
PAL).
1.
Click down arrow. A list of record rates appears.
2.
Click the desired record rate.
Quality —
Select the record quality to use for regular operation.
The default setting is
Normal
.
Super —
Record images at the highest image quality. Since
the unit uses the lowest level of compression, this setting
requires the highest amount of storage space.
Normal —
Record images at normal image quality. This
setting provides a balance between compression and storage
space requirements.
Extended Record —
Record images at the highest level of
compression. This setting requires the lowest amount of
storage space.
