manualshive.com logo in svg

American Dynamics Intellex DV16000, Installation And Operating Instructions Manual, Page: 47 / 201

Share
Download
American Dynamics Intellex DV16000 Installation And Operating Instructions Manual Download Page 47

Intellex

®

 Digital Video Management System Installation and Operating Instructions

47

Schedule Setup

MORE>>>

Normal —

At this setting, Intellex ignores the smaller, more

subtle changes between images.

Resolution —

This setting lets you choose either 640x240 or

320x240. 640x240 offers higher resolution, but less recording time.
320x240 provides less resolution but extends the recording time.
The default is 

640x240

.

Select another Regular Schedule Setup Option for configuration.
Otherwise, click 

OK

 to accept the new rate/quality settings, as

well as any changes on the other Regular Schedule Setup screens,
and return to the 

Setup Options 

screen. Click 

Cancel

 to cancel

the changes and return to the 

Setup Options 

screen. Click 

Help

 to

display online help for this screen.

Regular Time Setup

Use the 

Time 

screen to set the start times for daytime and

nighttime operation.

Start day at —

Use this option to set the start time for daytime

processing in 24-hour format. The default is 

06:00 

(6:00 a.m.).

Start night at —

Use this option to set the start time for

nighttime processing in 24-hour format. The default is 

18:00

(6:00 p.m.).

1.

Click the hours display. Click up arrow or down arrow to
display the desired hour (24-hour format).

2.

Click the minutes display. Click up arrow or down arrow to
display the desired minutes (30-minute increments).

Select another Regular Schedule Setup Option for configuration.
Otherwise, click 

OK

 to accept the new start times, as well as any

changes on the other Regular Schedule Setup screens, and return
to the 

Setup Options 

screen. Click 

Cancel

 to cancel the changes

and return to the 

Setup Options 

screen. Click 

Help

 to display

online help for this screen.

Regular Cameras Setup

Use the 

Cameras 1–8 

and 

Cameras 9–16 

screens to configure a

live filter for each camera, one for daytime and one for nighttime
operation. If you configure a filter and activity is detected (for
example, motion in the target area of the motion detection filter),
the unit records images from the camera at the record rate
specified in the Alarm Setup screens.

Cameras —

All camera names are listed down the left side of the

screen in camera order.

Summary of Contents for Intellex DV16000










































































































































































































Reviews:

No comments