American Dynamics Intellex DV16000 Installation And Operating Instructions Manual Download Page 35

Page: 35 / 201

Intellex

Digital Video Management System Installation and Operating Instructions

Camera Setup

MORE>>>

CAMERA SETUP

The Camera Setup screens let you define the name and
termination settings for each camera. You must possess the

Setup

Cameras

privilege to access it (see

Security Setup

From the main screen, click the

Setup

button. The

Setup

Options

screen appears (see

Setup Options Screen

Click the

Cameras

button. The

Names

screen (the first

Camera Setup screen) appears.

Use the

Names

screen to define the name of each camera. These

names are displayed when viewing live images and are stored in
the image database with recorded images.

1–16 —

Use the mouse pointer to highlight one of the current

camera names. Then use the virtual keyboard or the physical
keyboard (if attached) to enter the new name, up to 10 characters.
The default names are

Camera1

through

Camera16

Click

to accept the new camera names, as well as any changes

on the other Camera Setup screen. Click

Cancel

to cancel the

changes.

Click

Help

to display online help for this screen.

Since terminators are not required on Intellex units, use the

Termination

screen to define each camera’s setting, either

Ohms

Hi-Z

. The default is

75 Ohms

When set to

75 Ohms

, the unit terminates the camera. This is the

same as installing a terminator on the associated

Camera Out

connector.

When set to

Hi-Z

, the camera signal is passed through to the

associated

Camera Out

connector. This is the same as removing a

terminator and attaching a cable to the associated

Camera Out

connector.

Click

to accept the new termination settings, as well as any

changes on the other Camera Setup screen. Click

Cancel

cancel the changes.

Click

Help

to display online help for this

screen.

Summary of Contents for Intellex DV16000










































































































































































































Search results

Summary of Contents for Intellex DV16000

Reviews:

Related manuals for Intellex DV16000

Brands by name

Popular brands

American Dynamics Intellex DV16000, Installation And Operating Instructions Manual

Search results

Summary of Contents for Intellex DV16000

Reviews:

Related manuals for Intellex DV16000

Brands by name

Popular brands