American Dynamics Intellex DV16000 Installation And Operating Instructions Manual Download Page 179

Page: 179 / 201

Intellex

Digital Video Management System Installation and Operating Instructions

179

Archive Operation

MORE>>>

Restore Images

Select this option to copy images from an archive tape to the
restored images database. Once restored, these images can be
reviewed (see

Play Restored Images

NOTE: Restoring images is a protected feature. You must

possess the Archive Restore privilege to access it (see

Security Setup

NOTE: It may not be possible to restore a tape while Data

Lifetime is cleaning the database. Avoid Restore
operations during Data Lifetime processing.

To restore images:

From the main screen, click the

Archive

button. The

Summary of Contents for Intellex DV16000










































































































































































































Search results

Summary of Contents for Intellex DV16000

Reviews:

American Dynamics Intellex DV16000, Installation And Operating Instructions Manual, Page: 179 / 201

Search results

Summary of Contents for Intellex DV16000

Reviews: