American Dynamics ControlCenter ADCC0200, Quick Reference Manual

Page: 1 / 4

70
ControlCenter
TM
ADCC0200 and ADCC0300
Keyboard Quick Reference Guide
1
Keyboard Settings
The default setting for the keyboard is RS485 mode at 19200 baud. To change these settings,
enter the Special Config menu by pressing SHIFT ( ) and CLEAR ( ) keys within five
seconds of powering up the keyboard. Then press one of the following:
to change baud rate.
to change the mode (ADNet RS485, RS232).
to select Auto Repeat or Make/Break mode. See the matrix manual for correct setting.
to enable/disable the speaker.
Standard Matrix Operations
FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Select Monitor Monitor number ®
ü ü ü ü
Select Camera Camera number ®
ü ü ü ü
Select Matrix/Site Site number ® AND
ü ü ü ü
Telemetry Enable/Disable
ü û ü û
Pan Left/Right Joystick Left/Right
ü ü ü ü
Tilt Up/Down Joystick Up/Down
ü ü ü ü
Zoom In (or Twist Joystick Clockwise)
ü ü ü ü
Zoom Out (or Twist Joystick Anti-CW)
ü ü ü ü
Focus Near
ü ü ü ü
Focus Far
ü ü ü ü
Iris Open
ü ü ü ü
Iris Close
ü ü ü ü
Flip
ü ü ü ü
Engage Auto Iris AND , , or
ü ü ü ü
Engage Auto Focus AND , , or
ü ü ü ü
Select Preset Preset number ®
ü ü ü ü
Record Preset ® Preset number ®
ü û ü ü
Manually Trigger Alarm ® Alarm number ®
ü û ü û
Acknowledge Alarm
ü ü ü ü
Select Sequence Sequence number ®
ü ü ü ü
Select View View number ®
ü û ü û
Select Salvo Salvo number ® AND
û ü û ü
Intelligent Security & Fire