D A T A s h e e T
speedDome
®
Ultra
Outdoor Dome Housing
Features That Make a Difference:
Reinforced high impact design with vandal resistant option
Stores presets and patterns within the base to eliminate
reprogramming
Four alarm inputs, one output
Temperature-controlled interior environment
Automatic defog and defrost heater cycle modes with manual
heater on/off control
On-demand menu displays housing temperature and humidity
Thermostatically controlled heater and blower prevent excessive
buildup of ice and removes any that does accumulate in one hour
Meets IP66/NEMA 4 specifications
Includes four tamper-proof screws and driver bit
Surge and lightning protection of video, communications, alarm
input and output, and power
Plug and play connectors enable easy servicing of I/O board
Internal LEDs and switches verify proper power and communication
status
Integrated Unshielded Twisted Pair (UTP) simplifies wiring
and installation
J-Boxes available to facilitate wiring of housing and dome
Ceiling, pole, roof, wall and corner mounts available
The SpeedDome
®
Ultra outdoor housing allows SpeedDome
Ultra programmable dome cameras to be installed in
virtually any environment. The housing has been designed
to provide maximum protection to the internal camera in
various weather conditions. In extreme temperatures, the
housing’s built-in thermostatically controlled heater and blower
prevent excessive ice from forming on the outside bubble. In
addition, you can manually activate a defog and defrost mode
and even view the housing temperature and humidity. The
housing is constructed with a reinforced fiberglass high impact
polycarbonate material along with a UV stabilized sun shade,
trim ring and top cover. The bubble assembly is affixed to the
top via tamper-proof screws.
For applications where vandalism is a concern, a vandal
resistant model is available which includes an aluminum
sunshield cover and a high impact bubble which meets
ANSI-87.1 impact safety standards. For additional protection
a stainless steel bubble cage is also provided.
SpeedDome Ultra programmable dome cameras are easy to
install. Simply plug in the video cable, connect power and data,
and the installation is complete. Power and communications
LEDs provide diagnostics, confirm proper connections and aid
in troubleshooting.
Presets, patterns and other parameters are stored in the
housing’s I/O board so if a dome has to be replaced the
programming is automatically downloaded to the new dome.
The housing is equipped with four alarm inputs and one alarm
output and surge protection is provided to all video and external
lines. The housing is available with your choice of a clear or
smoked bubble and a variety of mounts make it easy for you to
install it in nearly any application.
An optional end cap assembly is ideal for cable interconnection
and with the use of third party fiber optic interfaces.