American Dynamics ADCI625-P221, Configuration And User'S Manual

Page: 59 / 142

Programs Menu
5-49
5
Step Action
1
Select
Current Faults
from the
Information
menu.
The Current Faults tab displays with a list of current faults found on the dome. Alarms will
be listed under the Component heading of DIOM.
- End -
Clearing Alarm Output Logs
When an alarm is triggered it registers on the dome in the Current Faults table. Clear the alarm
logs from the dome if it has been triggered.
Procedure 5-9 Clear an Alarm
Step Action
1
Select
Current Faults
from the
Information
menu.
The Current Faults tab displays.
2
Select the
Alarm Output
tab.
The Alarm Output tab displays.
3
‘Cancel Active Output’ will be displayed. Select
Apply
to clear active alarms.
4
The text will update to ‘Output Not Active’.
- End -
MicroSD Card
A MicroSD card can be used with the camera to provide additional functionality when using
alarms. The following provides details of functions available without and when using a MicroSD
card:
Without a MicroSD Card
• Current faults notifications displayed on camera if an alarm is triggered.
Using a MicroSD Card
• Current faults notifications displayed on camera if an alarm is triggered.
• Video/Audio and screenshot are saved to the MicroSD card.
• SMTP notifications can be sent.
• FTP uploads of video can be sent.
• Audio can be played via the Audio Out port.