American Dynamics ADCI625-P221, Configuration And User'S Manual

Page: 52 / 142

Programs Menu
5-42 Configuration and User Guide
Sequences
A Sequence is a sequential display of multiple camera Presets. Sequences provide a methodical
and effective way to monitor multiple areas of interest by switching to different Presets
automatically.
Sequences are created by identifying Preset views to include in the Sequence and specifying a
dwell time that controls how long each Preset remains on-screen before switching to another
Preset.
Up to 16 Sequences can be created, each with 16 steps (Presets).
Adding a Sequence
Create a new sequence on the dome using defined presets. Refer to Adding a new Preset if no
presets have yet been added to the dome.
Procedure 5-1 Add a Sequence
Step Action
1
If no presets have been created refer to Adding a new Preset before continuing to step 2.
2
Select
Sequences
from the
Programs
menu.
3
Select the
Add Sequence
tab.
The Add Sequence tab displays.
4
Enter the sequence name in the
Sequence
text box.
5
Select a preset from the
Preset Name
drop-down menu.
6
Enter a dwell time in seconds in the
Dwell Time
text box.
7
Select
Add
. The preset is now listed as part of the sequence.
Or
Select
Cancel
.
8
Repeat steps 5 to 7 to add further presets to the sequence.
Note
Up to 16 presets can be added to a sequence.
9
Select
Apply
to save the sequence.
- End -
Activating a Sequence
Activate a selected sequence.