American Dynamics ADCI625-P221, Configuration And User'S Manual

Page: 101 / 142

Networking Menu
7-91
7
Procedure 7-19 Delete a HTTPS Certificate
Step Action
1
Select
Maintenance
from the
Networking
menu.
2
Select the
HTTPS Certificate
tab.
The HTTPS Certificate tab displays.
3
Select
Delete
.
The camera will display a “Restarting HTTPS Service” page with a progress bar showing
the deletion progress.
4
When complete the camera will return to the log in page.
5
Refer to Procedure 3-1 Log in to the Dome.
- End -
Rebooting the Dome
Perform a reboot of the dome.
Procedure 7-20 Reboot the dome
Step Action
1
Select
Maintenance
from the
Networking
menu.
2
Select the
Reboot
tab.
The Reboot tab displays.
3
Select
Reboot
.
You will be prompted to confirm the dome reboot.
4
Select
OK
to confirm.
Or
Select
Cancel
.
5
The camera will display a “Rebooting” page with a progress bar showing the reboot
progress.
When the dome is restarted it checks its functionality by performing a homing routine
during which the camera pans and then either goes to the start point of the ‘apple peel’
pattern or if powered up once before, to the last position in memory. Once the camera
stops, it is online and ready to be accessed and controlled.
- End -