28
Installation and Operation Guide
2.7 The USB function
By connecting the IP camera with a PC via the USB connector, the IP camera can provide two
different functions.
1. Insert an SD card: As a card reader.
Insert an SD card into the IP camera, and then connect to the PC. You can transfer files between
the SD card and the PC. Once you've connected your IP camera to your computer, the Windows
system will detect the connection and ask you what you want to do with your SD card.
In other words, if you connect the IP camera with an SD card and the PC via the USB connector,
the IP camera can be used as a normal card reader.
2. Remove an SD card: As a configuring tool.
Before using the USB configuration setting page, please remember to remove the SD card or
your PC will read the SD card and won’t show this window.
DHCP ON
DHCP OFF
(default)
Figure 2.11 The USB function
NOTE: After changing the settings, please click t
he “Apply” button. All of the options will
be effective after removing the USB connector.
NOTE: After the IP address has been changed and/ or reset, please unplug the network
cable, and then plug it in once again to make sure the network connection is in
normal mode.
Network
Setting
