American Dynamics ADACSNETD Datasheet Download Page 1

D A T A   s h e e T

sensorNet/Manchester 

Distribution Panel

Features That Make a Difference:

   Amplifies SensorNet or Manchester protocol signals for multi-point 

dome control 

   Switch easily between SensorNet or Manchester protocols
   Accommodates home run dome wiring via 16 output ports 
   Supports home run, daisy chain, and junction box (J-Box) wiring 

topologies to accommodate any size system

   Install at head end or remote locations
   Rack (2U) mountable
   Thin, single PCB design allows the panel to be mounted either at the 

front or rear of an electronics rack, facing in or out

   Surge suppression available on all data and power connections
   ADACSNETDP model includes power supply that can power up to 

three panels (US) or five panels (International)

   Compatible with American Dynamics

 MegaPower matrix switcher/

controller systems and Intellex

®

 Digital Video Management Systems 

(1)  The host input ports will be used in sequence whenever the previous input port is not receiving data.

The SensorNet/Manchester distribution panel amplifies either 
a SensorNet or Manchester protocol signal for multi-point 
dome control which provides the flexibility to operate efficiently 
in either protocol setting. With 16 output driver links (two 
connectors per link), the panel can accommodate home run 
dome wiring, multiple daisy-chained links to domes, or J-Boxes.

The panel also includes inputs for two hosts allowing you to 
maintain a connection between both the primary and backup 
CPUs and the devices connected to the panel, thereby 
providing a redundant solution.

1

 For the ultimate control, you 

can monitor signal activities on each channel. 

Installing the panel is easy, either at the head end or at remote 
locations and it can be used in place of a SensorNet J-Box 
when power is available for domes locally. The sleek, 2U design 
can easily be mounted at the front or rear of an electronics rack, 
facing in or out. 

The panel is compatible with all versions of American Dynamics 
SpeedDome programmable dome cameras, Manchester 
receiver drivers, J-Boxes, and control systems that use 
SensorNet or Manchester protocols.

Reviews: