American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 16
American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 15
ADDRESS MENU -
AOO1 - A511
(Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX
(Test) - Tests the functions of each channel. Note:
Some channels cannot be tested.
PLAY MENU -
RUN
- Runs the unit as a “master” or in a stand alone mode. The
unit will run a internal program mode.
AUDI
(Audio) - Runs the unit as a “master” or in a stand alone,
sound active mode.
AUTO
- This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• “Hold” - This is the default setting, which in case the signal is
lost the fixute will “hold” at the last setting.
• “Close” - The fixture will return to its “home” standing.
• “Auto” - The fixture will go into Auto mode and run a pre-pro-
grammed show.
• “Audi” - The fixture will go into Sound Active mode.
RESE (RESET) MENU -
ALL
- Resets all the motors in the unit.
SCAN
- Resets the motors that control pan/tilt.
COLR
(Color) - Resets the color motors.
GOBO
- Resets the gobo motors.
OTHR
- Resets all other motors.
TIME MENU -
LIFE
- Displays the fixtures total running time.
Vizi Scan LED PRO
System Menu
Default setting shaded.
1
ADDR
AXXX A001
Indicate the staring DMX address
A001 also is the setting for slave
2
TEST
T-01~T-XX
Automatically test the function
RUN
MSTR/ALON
Runs fixture as “master” or “alone” for
auto
AUDI
MSTR/ALON
Runs fixture as “master” or “alone” for
audio
3
PLAY
AUTO
Clos/Hold/Auto/Audi
No DMX Status
ALL
Reset all motors and returns fixture to
home
SCAN
Reset only motors for pan/tilt
COLR
Reset only motors for colors
GOBO
Reset only motors for gobo and rotation
4
RESE
OTHR
Reset other motors
LIFE
0000~9999
Displays the total fixture running time
5
TIME
CLMP
Clear lamp running time
6
RPAN
ON/OFF
Reverses the pan movements
7
RTLT
ON/OFF
Reverses the tilt movements
8
FINE
ON/OFF
Switch 16 bit/8 bit
9
MIC
M-XX M-70
Mic sensitivity
VALU
D–XX D-00 (DXXX)
Display the DMX512 value of each
channel
D ON
ON/OFF
Display turn off after 2mins
FLIP
ON/OFF
This function will reverse the display
180
10
DISP
LOCK
ON/OFF
Key lock
RDMX
ON/OFF
Change DMX address via external
controller
SPOT
ON/OFF
Lamp optimization
DFSE
ON/OFF
Resets all the fixture functions to
default
FANS
AUTO/HIGH/LOW
Fan’s mode select
HIbE
OFF/1-99M 15M
Stand by mode
VER
V1.0~V9.9
Software version
CODE
CXXX
Fixture code *code is “C050”
11
SPEC
ADJU
CH01~CHXX
XXXX(-128~127)
Motor Fix
SEPR
AUTO
IP01~IP07
Select program to be edit
STEP
S–01 ~S–48
Set the amount of your
program
C–01~C–XX
XXX(0~255)
Edit the channels of each
scene
TIME
T XXX(001~999)
Time for each scene
SCXX
CEDT
ON/OFF
Edit program via controller
REC.
RE.XX
Auto Save
12
EDIT
RUN
ON/OFF
Program test
Vizi Scan LED PRO
System Menu