American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 8
American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 7
Vizi Scan LED PRO
Mounting
The Vizi Scan LED PRO is fully operational in three different mount-
ing positions, hanging upside-down from a ceiling, side mounted, or
set on a flat level surface. To avoid internal damage to the unit, never
mount the unit on its side as illustrated above. Be sure this fixture is
kept at least 0.5m away from any flammable materials (decoration
etc.). Always use and install the supplied safety cable as a safety
measure to prevent accidental damage and/or injury in the event the
clamp fails (see next page). Never use the carrying handles for sec-
ondary attachment.
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualifications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
Vizi Scan LED PRO
Mounting
Screw one clamp each via a M12 screw and nut directly into
the bracket of the scanner. Pull the safety-cable through the
bracket of the base and over the trussing system or safe fixa-
tion spot.
NOTICE:
The suitable enviromental temperature for this light-
ing fixture is between -25˚ C to 45˚ C. Do not place this lighting
fixture in an enviroment where the temperatures are under or
above the temperatures stated above. This will allow the fixture
to run at its best and help prolong the fixture life.