Unpacking:
Thank you for purchasing the Vizi Scan LED PRO by
American DJ
®
. Every Vizi Scan LED PRO has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your fix-
ture for any damage and be sure all equipment necessary to operate
the unit has arrived intact. In the event damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Please do not return this unit to your dealer with-
out contacting customer support first.
Introduction:
The Vizi Scan LED PRO is a bright, high output, intel-
ligent DMX scanner. The Vizi Scan LED PRO can be either a 12 or 14
DMX Channel unit. The fixture can operate in three different operating
modes; sound active, auto run, or DMX control. The fixture can run
as as a Stand Alone unit or in a Master/Slave configuration. The Vizi
Scan LED PRO comes with several built in programs and is best used
in multiples of four. For best results use fog or special effects smoke to
enhance the beams projections.
During the initial start-up or use of this product a light smoke or
smell may arise from the unit. This is a normal process and is
cause by the heat associated with the unit.
Customer Support:
American DJ
®
provides a toll free customer
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
Vizi Scan LED PRO
General Information
American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 4
American DJ
®
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 3
• Micro-Stepping Motors for Smooth Color and Gobo Transitions
• 2 DMX Channel Modes - 12 Channel Mode & 14 Channel Mode
• Independent Gobo and Color Wheels
• 7 Rotating Gobos w/ Shake, 5 Metal and 2 Glass + Spot - All
Replaceable
• 8 Colors, Plus White - With Rainbow
• Prism Wheel: 3 Facet; Trapezoid; Frost
• RDMX - Lets you set the DMX address from any DMX Controller
• 3 Operating Modes - Sound Active, Auto Run, & DMX Control
• Internal Microphone
• Edit and Save Scenes into the Memory
• Remote Focus
• Variable Strobe (1-12 fps)
• Motor Calibration Adjustment
• Pan: 540 or 630 Degrees
• Tilt: 35 Degrees
• Mic Sensitivity Adjustment
• Digital Display for Address and Function Setting
Vizi Scan LED PRO
Features
Vizi Scan LED PRO
RDMX
Regarding RDMX :
1. The units will be shipped preset in 16 channel increments
from the factory
2. While using RDMX, if all units are set to the same DMX
address, all units will change to the new DMX address you
selected.
EXAMPLE: You have four units, and all the units are set to the
DMX address of “1”, and you change one unit to DMX address
“17”, this will cause all the units to change to DMX address
“17”.
All four units must be on 4 different starting addresses to indi-
vidually set the DMX addresses for each unit.
For more on this feature see pages 25-26.